[Great Western Vehicle] [Right Livelihood] [Waste to Fuel] [Filter & Pump Manifold design 1] [Filter & Pump Manifold design II] [Filter & Pump Manifold design III] [Filter & Pump Manifold design IV] [SVO Links]


Pump & Filter Manifold Dialogs

Extracted Dialog from vegoil-diesel

Date: Sun, 31 Jul 2005 09:59:51 +0100

   From: "Charles Weaver" <charles@c...>

Subject: Re: Re: Filters?

Any specialist filter supplier. I get mine fom a company called Wyco here In Redruth.


Date: Mon, 01 Aug 2005 07:10:30 -0000

   From: "Chug" <biofuelcommunity@n...>

Subject: Re: Filters?

Hi Phil

rough filter through sieve or old t shirt then through 5 micron filter, some even go down to 1 micron they are available at most good motor parts places or Allied Filters on

0161 777 7570

regards

Chug


Date: Wed, 03 Aug 2005 03:31:26 -0000

   From: "Dave" <davidalbert1@y...>

Subject: Re: Filters?

I got my filter system off of ebay from 2 sources. The sellers names  are grease beast and clean grease. both groups of people are nice and  easy to deal with and also have the lowest prices Ive found yet in the  US. They have some pretty nice systems that use home under sink type  filters. In my system first I have a 100 micron screen, 7/8" clear  tubing 5/8" inside diamiter, hand crank pump (for now) filter #1 with a  20 micron then filter #2 with a 5 micron then into 15 gallon containers  that transport nicely in the back of my jeep. Also make sure to put  valves at the front and back tubes of the system otherwise it wont stop  pripping exess wvo. I tried a drill pump from the hardware store the  first time I collected and it worked ok once but it was completely dead  the second time I tried to use it. cost me $6 for the piece of crap.  shoulda done it right the first time.   


[Great Western Vehicle] [Right Livelihood] [Waste to Fuel] [Filter & Pump Manifold design 1] [Filter & Pump Manifold design II] [Filter & Pump Manifold design III] [Filter & Pump Manifold design IV] [SVO Links]